Screw cap GL 45 For corrective media bottles Usable up to 140°C Similar to pictures shown Screw cap GL 45 For corrective media bottles Usable up to 140°C Similar to pictures shown read more
Silicone tube for multiple applications, e.g. reservoir bottles, respectively headpieces or addition ports Package: 25 m Quality: platinum 60° Shore A, translucent Tolerance DIN 7715 Inner diameter x wall thickness: 3.2 x 1.6 mm Similar to pictures shown Also available: packages of 5 m or 10 m Silicone tube for multiple applications, e.g. reservoir bottles, respectively headpieces or addition... read more
Silicone tube for multiple applications, e.g. reservoir bottles, respectively headpieces or addition ports Package: 10 m Quality: platinum 60° Shore A, translucent Tolerance DIN 7715 Inner diameter x wall thickness: 3.2 x 1.6 mm Similar to pictures shown Also available: packages of 10 m or 25 m read more
Silicone tube Package: 25 m Quality: platinum 60° Shore A, translucent Tolerance DIN 7715 Inner diameter x wall thickness: 1.6 x 1.6 mm Similar to pictures shown Also available: packages of 5 m or 10 m Silicone tube Package: 25 m Quality: platinum 60° Shore A, translucent Tolerance DIN 7715 Inner diameter x wall thickness: 1.6 x 1.6 mm Similar to pictures shown Also available: packages of 5 m or... read more
Silicone tube Package: 5 m Quality: platinum 60° Shore A, translucent Tolerance DIN 7715 Inner diameter x wall thickness: 1.6 x 1.6 mm Similar to pictures shown Also available: packages of 10 m or 25 m read more
Silicone tube Package: 25 m Quality: platinum 60° Shore A, translucent Tolerance DIN 7715 Inner diameter x wall thickness: 1.6×0.8 mm Similar to pictures shown Also available: packages of 5 m or 10 m Silicone tube Package: 25 m Quality: platinum 60° Shore A, translucent Tolerance DIN 7715 Inner diameter x wall thickness: 1.6×0.8 mm Similar to pictures shown Also available: packages of... read more
Silicone tube Package: 5 m Quality: platinum 60° Shore A, translucent Tolerance DIN 7715 Inner diameter x wall thickness: 1.6×0.8 mm Similar to pictures shown Also available: packages of 10 m or 25 m read more
For the addition of inoculation cultures or additional media to a bioreactor For use with autoclavable media bottles Sterile sleeve is available separately Diameter 6 mm Spare part for bioreactors Similar to pictures shown For the addition of inoculation cultures or additional media to a bioreactor For use with autoclavable media bottles Sterile sleeve is available separately Diameter 6 mm Spare... read more
For use with corrective solutions or substrates Autoclavable glass bottle made of borosilicate glass With headpiece made of stainless steel with four hose nozzles for 3.2×1.6 mm hose With ventilation filter 0.2 μm We also offer headpieces with less ports (please see category “headpieces”) Similar to pictures shown For use with corrective solutions or substrates Autoclavable glass bottle... read more
For use with corrective solutions or substrates Autoclavable glass bottle made of borosilicate glass With headpiece made of stainless steel with two hose nozzles for 3.2×1.6 mm hose With ventilation filter 0.2 μm We also offer headpieces with more ports (please see category “headpieces”) Similar to pictures shown For use with corrective solutions or substrates Autoclavable glass bottle made... read more
Sterile filter inlet air / headspace/ outlet air Membrane 0.2 µm PTFE 50 mm Spare part for e.g. reservoir bottles Similar to pictures shown Sterile filter inlet air / headspace/ outlet air Membrane 0.2 µm PTFE 50 mm Spare part for e.g. reservoir bottles Similar to pictures shown read more
Silicone tube for multiple applications, e.g. reservoir bottles, respectively headpieces or addition ports Package: 10 m Quality: platinum 60° Shore A, translucent Tolerance DIN 7715 Inner diameter x wall thickness: 8 x 1.5 mm Similar to pictures shown read more
For use with membranes in bioreactor headplates For use with addition ports and inoculation needles Common for autoclavable systems With inner thread for closing with blind plugs or use with screwable inoculation kits Mebranes (BBI-44130004) are available separately Similar to pictures shown For use with membranes in bioreactor headplates For use with addition ports and inoculation needles... read more
For use with corrective solutions or substrates Autoclavable glass bottle made of borosilicate glass With headpiece made of stainless steel with 4 hose nozzles for 3.2×1.6 mm hose With ventilation filter 0.2 μm We also offer headpieces with other ports (please see category “headpieces”) Similar to pictures shown For use with corrective solutions or substrates Autoclavable... read more
For use with corrective solutions or substrates Autoclavable glass bottle made of borosilicate glass With headpiece made of stainless steel with 4 hose nozzles for 3.2×1.6 mm hose With ventilation filter 0.2 μm We also offer headpieces with other ports (please see category “headpieces”) Similar to pictures shown For use with corrective solutions or substrates Autoclavable... read more
For use with corrective solutions or substrates Autoclavable glass bottle made of borosilicate glass With headpiece made of stainless steel with 4 hose nozzles for 3.2×1.6 mm hose With ventilation filter 0.2 μm We also offer headpieces with other ports (please see category “headpieces”) Similar to pictures shown For use with corrective solutions or substrates Autoclavable... read more
For the addition of inoculation cultures or additional media to a bioreactor For autoclavable vessels With 3 straight hose nozzles 3 independent addition ways For use with autoclavable media bottles Spare part for bioreactors Similar to pictures shown read more
Suitable for 3-way addition ports PG 13,5 (Art.-No.: BBI-43630253, BBI-43630252) Material: EPDM Package of 5 pieces Similar to pictures shown Suitable for 3-way addition ports PG 13,5 (Art.-No.: BBI-43630253, BBI-43630252) Material: EPDM Package of 5 pieces Similar to pictures shown read more
Seal for screw cap GL25 Clear silicone rubber gasket 23mm OD x 17mm ID Package: 10 pieces Images similar Seal for screw cap GL25 Clear silicone rubber gasket 23mm OD x 17mm ID Package: 10 pieces Images similar read more
For use with corrective solutions or substrates Autoclavable glass bottle made of borosilicate glass With headpiece made of stainless steel with two hose nozzles for 3.2 x 1.6 mm hose With ventilation filter 0.2 μm We also offer headpieces with more ports (please see category “headpieces”) Images similar For use with corrective solutions or substrates Autoclavable glass bottle... read more
For use with corrective solutions or substrates Autoclavable glass bottle made of borosilicate glass With headpiece made of stainless steel with two hose nozzles for 3.2 x 1.6 mm hose With ventilation filter 0.2 μm We also offer headpieces with more ports (please see category “headpieces”) Images similar For use with corrective solutions or substrates Autoclavable glass bottle... read more
For the addition of inoculation cultures or additional media to a bioreactor For autoclavable vessels With 3 angled hose nozzles for better handling For use with autoclavable media bottles Spare part for bioreactors Images similar read more
Sterile filter inlet air / headspace/ outlet air Membrane 0,2 µm PP 30 mm Package of 10 pieces Spare part for e.g. reservoir bottles Images similar Sterile filter inlet air / headspace/ outlet air Membrane 0,2 µm PP 30 mm Package of 10 pieces Spare part for e.g. reservoir bottles Images similar read more
Headpiece with 2 hose nozzles 4×1 mm for reservoir bottles with GL45-thread Connection system made of stainless steel For use with screw cap GL45 with hole and seal (available separately) Outer diameter x wall thickness = 4×1 mm Similar to pictures shown Headpiece with 2 hose nozzles 4×1 mm for reservoir bottles with GL45-thread Connection system made of stainless steel For use... read more
Slit membrane For use in STT-quick connect couplings female (Art.-No.: BBI-44130650 or BBI-44130652) Package: 20 pieces Larger quantities on demand Similar to pictures shown Slit membrane For use in STT-quick connect couplings female (Art.-No.: BBI-44130650 or BBI-44130652) Package: 20 pieces Larger quantities on demand Similar to pictures shown read more
STT quick connect couplings are used for sterile tube connections between culture vessel and harvest or inoculation vessels. Easy, secure and fast handling! The male part of a STT quick coupling is normally used on the side of the harvest/inoculation vessel. Autoclavable quick connect coupling half made of stainless steel For sterile connections of tubes with an internal diameter of 1.6 …... read more
STT quick connect couplings are used for sterile tube connections between culture vessel and harvest or inoculation vessels. Easy, secure and fast handling! The female part of a STT quick coupling is normally used on the side of the culture vessel. Autoclavable quick connect coupling half made of stainless steel For sterile connections of tubes with an internal diameter of 1.6… 2.0 mm Male... read more
STT quick connect couplings are used for sterile tube connections between culture vessel and harvest or inoculation vessels. Easy, secure and fast handling! The male part of a STT quick coupling is normally used on the side of the harvest/inoculation vessel. Autoclavable quick connect coupling half made of stainless steel For sterile connections of tubes with an internal diameter of 3.2 … 5.0 mm... read more
STT quick connect couplings are used for sterile tube connections between culture vessel and harvest or inoculation vessels. Easy, secure and fast handling! The female part of a STT quick coupling is normally used on the side of the culture vessel. Autoclavable quick connect coupling half made of stainless steel For sterile connections of tubes with an internal diameter of 3.2 … 5.0 mm Male... read more
Aerosolfree sampling from a bioreactor Head plate with membrane valve and connection to sampling valve (on top) and connection for steam supply (sideways) For sampling bottle with GL45 thread Valve unit and connections can be sterilized Standard: DN6 Also available with Tri-Clamp-connection Other connections on demand Similar to pictures shown read more
Aerosolfree sampling from a bioreactor Head plate with membrane valve and connection to sampling valve (on top) and connection for steam supply (sideways), triclamp D25 For sampling bottle with GL45 thread Standard: DN6 Valve unit and connections can be sterilized Also available with sterile screwfitting Other connections on demand Similar to pictures shown read more
Screw cap GL 45 with centrical hole Red For corrective media bottles For use with headpieces and seals (available separately) Usable up to 180°C Package: 10 pieces Similar to pictures shown Screw cap GL 45 with centrical hole Red For corrective media bottles For use with headpieces and seals (available separately) Usable up to 180°C Package: 10 pieces Similar to pictures shown... read more
Seal for screw cap GL45 Clear Silicone Rubber Gasket 42 mm OD x 30 mm ID Package: 10 pieces Similar to pictures shown Seal for screw cap GL45 Clear Silicone Rubber Gasket 42 mm OD x 30 mm ID Package: 10 pieces Similar to pictures shown read more
Headpiece with 5 hose nozzles 4×1 mm for reservoir bottles with GL45-thread Connection system made of stainless steel For use with screw cap GL45 with hole and seal (available separately) Outer diameter x wall thickness = 4×1 mm Similar to pictures shown Headpiece with 5 hose nozzles 4×1 mm for reservoir bottles with GL45-thread Connection system made of stainless steel For use... read more
Headpiece with 3 hose nozzles 6×1 mm for reservoir bottles with GL45-thread Connection system made of stainless steel For use with screw cap GL45 with hole and seal (available separately) Outer diameter x wall thickness = 6×1 mm Similar to pictures shown Headpiece with 3 hose nozzles 6×1 mm for reservoir bottles with GL45-thread Connection system made of stainless steel For use... read more
Headpiece with 2 hose nozzles 8×1 mm for reservoir bottles with GL45-thread Connection system made of stainless steel For use with screw cap GL45 with hole and seal (available separately) Outer diameter x wall thickness = 8×1 mm Similar to pictures shown Headpiece with 2 hose nozzles 8×1 mm for reservoir bottles with GL45-thread Connection system made of stainless steel For use... read more
Headpiece with 4 hose nozzles 4×1 mm for reservoir bottles with GL45-thread Connection system made of stainless steel For use with screw cap GL45 with hole and seal (available separately) Outer diameter x wall thickness = 4×1 mm Similar to pictures shown Headpiece with 4 hose nozzles 4×1 mm for reservoir bottles with GL45-thread Connection system made of stainless steel For use... read more
Headpiece with 2 hose nozzles 4×1 mm for reservoir bottles with GL45-thread Connection system made of stainless steel For use with screw cap GL45 with hole and seal (available separately) Outer diameter x wall thickness = 4×1 mm Similar to pictures shown Headpiece with 2 hose nozzles 4×1 mm for reservoir bottles with GL45-thread Connection system made of stainless steel For... read more
For use with corrective solutions or substrates Autoclavable glass bottle made of borosilicate glass With headpiece made of stainless steel with two hose nozzles for 3.2×1.6 mm hose With ventilation filter 0.2 μm We also offer headpieces with more ports (please see category “headpieces”) Similar to picture shown For use with corrective solutions or substrates Autoclavable... read more
For use with corrective solutions or substrates Autoclavable glass bottle made of borosilicate glass With headpiece made of stainless steel with two hose nozzles for 3.2×1.6 mm hose With ventilation filter 0.2 μm We also offer headpieces with more ports (please see category “headpieces”) Similar to pictures shown For use with corrective solutions or substrates Autoclavable... read more
Silicone tube for multiple applications, e.g. reservoir bottles, respectively headpieces or addition ports Package: 10 m Quality: platinum 60° Shore A, translucent Tolerance DIN 7715 Inner diameter x wall thickness: 3.2 x 1.6 mm Similar to pictures shown Also available: packages of 5 m or 25 m Silicone tube for multiple applications, e.g. reservoir bottles, respectively headpieces or addition... read more
Silicone tube Package: 10 m Quality: platinum 60° Shore A, translucent Tolerance DIN 7715 Inner diameter x wall thickness: 1.6 x 1.6 mm Similar to pictures shown Also available: packages of 5 m or 25 m Silicone tube Package: 10 m Quality: platinum 60° Shore A, translucent Tolerance DIN 7715 Inner diameter x wall thickness: 1.6 x 1.6 mm Similar to pictures shown Also available: packages of 5 m or... read more
Silicone tube Package: 10 m Quality: platinum 60° Shore A, translucent Tolerance DIN 7715 Inner diameter x wall thickness: 1.6×0.8 mm Similar to pictures shown Also available: packages of 5 m or 25 m Silicone tube Package: 10 m Quality: platinum 60° Shore A, translucent Tolerance DIN 7715 Inner diameter x wall thickness: 1.6×0.8 mm Similar to pictures shown Also available: packages of... read more
Septum for membrane holder 19 mm (Art.-No.: BBI-44130005) In white Material: Brombutyl (FDA-conform) For use with addition ports and inoculation needles For in-situ and autoclavable systems Package: 20 pieces Larger quantities on demand Also available with material VMQ grey Similar to pictures shown Septum for membrane holder 19 mm (Art.-No.: BBI-44130005) In white Material:... read more
For use with membranes in bioreactor headplates For use with addition ports and inoculation needles For in-situ and autoclavable systems With inner thread for closing with blind plugs or use with screwable inoculation kits Mebranes (BBI-44130004) are available separately Similar to pictures shown For use with membranes in bioreactor headplates For use with addition ports and inoculation needles... read more
Used for manual sampling in bypass Used with inoculation needles and cannulas The membrane is pinched with a cannula in order to draw a sterile sampling Accessorie for Manual Bypass Sampler (BBI-43830000) or Inoculation Port (BBI-43630200) Package: 10 pieces Similar to pictures shown Used for manual sampling in bypass Used with inoculation needles and cannulas The membrane is pinched with a... read more
Used for manual sampling in bypass Used with inoculation needles and cannulas With inoculation port and safety cap A membrane is pinched with a cannula in order to draw a sterile sampling It is possible to use the bypass sampler as a bypass addition port Accessories for bioreactors Similar to pictures shown Used for manual sampling in bypass Used with inoculation needles and cannulas With... read more
For the addition of inoculation cultures or additional media to a bioreactor Four ports for adding For use with autoclavable media bottles Autoclavable with sterile sleeve With 4 hose noozles for hose with Di = 1.6 mm Spare part for bioreactors Similar to pictures shown For the addition of inoculation cultures or additional media to a bioreactor Four ports for adding For use with... read more
For the addition of inoculation cultures or additional media to a bioreactor For use with autoclavable media bottles Diameter needle 8 mm Spare part for bioreactors Similar to pictures shown For the addition of inoculation cultures or additional media to a bioreactor For use with autoclavable media bottles Diameter needle 8 mm Spare part for bioreactors Similar to pictures shown For the addition... read more
For the addition of inoculation cultures or additional media to a bioreactor For use with autoclavable media bottles Diameter 8 mm Spare part for bioreactors Similar to pictures shown For the addition of inoculation cultures or additional media to a bioreactor For use with autoclavable media bottles Diameter 8 mm Spare part for bioreactors Similar to pictures shown read more
For the addition of inoculation cultures or additional media to a bioreactor For use with autoclavable media bottles Sterile sleeve is available separately Diameter 6 mm Spare part for bioreactors Similar to pictures shown For the addition of inoculation cultures or additional media to a bioreactor For use with autoclavable media bottles Sterile sleeve is available separately Diameter 6 mm Spare... read more
For the addition of inoculation cultures or additional media to a bioreactor For use with autoclavable media bottles Sterile sleeve is available separately Spare part for bioreactors Similar to pictures shown For the addition of inoculation cultures or additional media to a bioreactor For use with autoclavable media bottles Sterile sleeve is available separately Spare part for bioreactors... read more
For the safe addition of inoculation cultures or additional media to a bioreactor For piercing with injection needles or syringes For the use with disposable membranes ID = 4 mm Spare part for bioreactors Similar to pictures shown read more
Autoclavable pressure vessel 50 liter For media to be sterilized As a vessel for correction fluid or substrate Transfer via pressure overlay or tube pumps into up- or downstream vessels With several Rd 28×1/8″ ports for inoculation kit, manometer or probes With sight glass and manometer Up to 10 bar Similar to picture shown read more
Autoclavable pressure vessel Ca. 5 liter For media to be sterilized As a vessel for correction fluid or substrate Transfer via pressure overlay or tube pumps into up- or downstream vessels With several Rd 28×1/8″ ports for inoculation kit, manometer or probes Similar to picture shown read more