1-way addition port Dm=6 mm, M 26 x 1

For the addition of inoculation cultures or additional media to a bioreactor For use with autoclavable media bottles Sterile sleeve is available separately Diameter 6 mm Spare part for bioreactors Similar to pictures shown For the addition of inoculation cultures or additional media to a bioreactor For use with autoclavable media bottles Sterile sleeve is available separately Diameter 6 mm Spare...
read more

Membrane holder M 26 x 1

For use with membranes in bioreactor headplates For use with addition ports and inoculation needles Common for autoclavable systems With inner thread for closing with blind plugs or use with screwable inoculation kits Mebranes (BBI-44130004) are available separately Similar to pictures shown For use with membranes in bioreactor headplates For use with addition ports and inoculation needles...
read more

3-way Addition Port PG 13.5

For the addition of inoculation cultures or additional media to a bioreactor For autoclavable vessels With 3 straight hose nozzles 3 independent addition ways For use with autoclavable media bottles Spare part for bioreactors Similar to pictures shown
read more

Flat seal for Pg 13.5

Suitable for 3-way addition ports PG 13,5 (Art.-No.: BBI-43630253, BBI-43630252) Material: EPDM Package of 5 pieces Similar to pictures shown Suitable for 3-way addition ports PG 13,5 (Art.-No.: BBI-43630253, BBI-43630252) Material: EPDM Package of 5 pieces Similar to pictures shown
read more

Reservoir bottle 5 L with 2 hose nozzles 4 x 1 mm

For use with corrective solutions or substrates Autoclavable glass bottle made of borosilicate glass With headpiece made of stainless steel with two hose nozzles for 3.2 x 1.6 mm hose With ventilation filter 0.2 μm We also offer headpieces with more ports (please see category “headpieces”) Images similar For use with corrective solutions or substrates Autoclavable glass bottle...
read more

3-way addition port PG 13,5 with angled hose nozzles

For the addition of inoculation cultures or additional media to a bioreactor For autoclavable vessels With 3 angled hose nozzles for better handling For use with autoclavable media bottles Spare part for bioreactors Images similar
read more

Membrane 19mm, material: Brombutyl white

Septum for membrane holder 19 mm  (Art.-No.: BBI-44130005) In white Material: Brombutyl (FDA-conform) For use with addition ports and inoculation needles For in-situ and autoclavable systems Package: 20 pieces Larger quantities on demand Also available with material VMQ grey Similar to pictures shown Septum for membrane holder 19 mm  (Art.-No.: BBI-44130005) In white Material:...
read more

Membrane Holder Rd 28×1/8″

For use with membranes in bioreactor headplates For use with addition ports and inoculation needles For in-situ and autoclavable systems With inner thread for closing with blind plugs or use with screwable inoculation kits Mebranes (BBI-44130004) are available separately Similar to pictures shown For use with membranes in bioreactor headplates For use with addition ports and inoculation needles...
read more

Membrane for manual bypass sampler or inoculation port (silicone)

Used for manual sampling in bypass Used with inoculation needles and cannulas The membrane is pinched with a cannula in order to draw a sterile sampling Accessorie for Manual Bypass Sampler (BBI-43830000) or Inoculation Port (BBI-43630200) Package: 10 pieces Similar to pictures shown Used for manual sampling in bypass Used with inoculation needles and cannulas The membrane is pinched with a...
read more

4-way addition port M 26 x 1

For the addition of inoculation cultures or additional media to a bioreactor Four ports for adding For use with autoclavable media bottles Autoclavable with sterile sleeve With 4 hose noozles for hose with Di = 1.6 mm Spare part for bioreactors Similar to pictures shown   For the addition of inoculation cultures or additional media to a bioreactor Four ports for adding For use with...
read more

3-way addition port Dm=8 mm, Rd 28×1/8

For the addition of inoculation cultures or additional media to a bioreactor For use with autoclavable media bottles Diameter needle 8 mm Spare part for bioreactors Similar to pictures shown For the addition of inoculation cultures or additional media to a bioreactor For use with autoclavable media bottles Diameter needle 8 mm Spare part for bioreactors Similar to pictures shown For the addition...
read more

1-way addition port Dm=8 mm, Rd 28×1/8

For the addition of inoculation cultures or additional media to a bioreactor For use with autoclavable media bottles Diameter 8 mm Spare part for bioreactors Similar to pictures shown For the addition of inoculation cultures or additional media to a bioreactor For use with autoclavable media bottles Diameter 8 mm Spare part for bioreactors Similar to pictures shown
read more

1-way addition port Dm=6 mm, Rd 28×1/8

For the addition of inoculation cultures or additional media to a bioreactor For use with autoclavable media bottles Sterile sleeve is available separately Diameter 6 mm Spare part for bioreactors Similar to pictures shown For the addition of inoculation cultures or additional media to a bioreactor For use with autoclavable media bottles Sterile sleeve is available separately Diameter 6 mm Spare...
read more

1-way addition port Dm=4 mm, Rd 28×1/8

For the addition of inoculation cultures or additional media to a bioreactor For use with autoclavable media bottles Sterile sleeve is available separately Spare part for bioreactors Similar to pictures shown For the addition of inoculation cultures or additional media to a bioreactor For use with autoclavable media bottles Sterile sleeve is available separately Spare part for bioreactors...
read more

Inoculation Port with Septum for 11mm Ports

For the safe addition of inoculation cultures or additional media to a bioreactor For piercing with injection needles or syringes For the use with disposable membranes ID = 4 mm Spare part for bioreactors Similar to pictures shown
read more